Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
B102097-0-0113 Page 11
GRILL ASSEMBLY
2. Attach vent stop using one #10-24 x 1-1/4 pan-head screw
and spacer on the right side of the top vent opening. Tighten
with #10-24 lock nut from underside of grill body top. Use
hand tools. See Figure 7.
Figure 7
3. Place the smoke vent assembly on top vent opening and
secure with one #10-24 x 1-1/4 pan-head screw and one
#10-24 locknut on underside of grill body top. Do not tighten
so much that the vent cannot swing open and close freely.
Use hand tools. See Figure 8.
Figure 8
Upper Spark Arrester Plate
1. Secure the upper spark arrester plate to the inside of the
grill body top using four #10-16 x 3/4” pan-head screws as
shown in Figure 9.
Figure 9
Handle
Tip: For ease of installation, slightly lubricate the front handle with
liquid soap before pushing the foam grip into place. See Figure 10.
Figure 10
Fasten the front handle to the grill lid with two #10-24 x 1” screws.
See Figure 11.
Figure 11