Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
How to Assemble the
Bradley Smoker®
1. Remove smoker from box.
2. Take all packaged parts out of
smoker.
3. Remove all protective packaging
materials from parts.
Install Smoke Generator:
• Attach smoke generator (1) to the
smoker tower (2).
• Aim the bisquette burner (F)
toward the tower opening.
• Align smoke generator key holes to
smoker tower locating supports (3).
• Secure the generator by pushing
down rmly.
• Insert the feeder tube (4) on top
of the smoke generator and load it
with the desired number of Bradley
Flavor Bisquettes®.
• Plug the short jumper cord (E-not
shown) from the smoke generator
into the smoker tower.
Set Up Smoker Tower:
• Place Racks (C) onto side supports.
• Place Drip Tray (B) “V” facing
down beneath the Racks on the
brass side pins.
• Place the Rectangular Tray (J) on
the bottom of the Smoker.
• Fill the Drip Bowl (D) half full
of water and place in the center
of the Rectangular Tray to catch
burnt Bisquettes. During a long
smoking period, the Drip Bowl will
require changing the water. Plug
the Long Power Cord (A) for the
smoke generator into an approved
grounded electrical outlet.
To Remove Smoke Generator:
•Unplug short jumper cord (E).
•Detach smoke generator from the
smoker tower by raising the smoke
generator gently upward and pull it
outward.
Handling of Packaging
All packaging should be discarded
as per the regulations in your area.
The box can be used only to store
smoker when not in use. The box
should not be used as a cover when
smoker is in use.
As s e m b l y In s t r u c t I o n s
Original Black Bradley Smoker (Model: BTIS1; BTISCE240EU)
Stainless Steel Bradley Smoker (Model: BTST02; BTSTCE240EU)
For 4 Rack Digital Smoker and 6 Rack Digital Smoker Assembly Instructions See Page 9
Refer to Part Numbers in the Bradley Smoker External Components List and Internal
Components List Diagrams
5