Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Ge n e r a l Ma i n t e n a n c e
Refer to the External Components List & Internal Components List Diagrams
Important Safety Precautions
• e Bradley Smoker must be maintained and cleaned after each use.
• Unplug the Long Power Cord prior to commencement of any
maintenance or cleaning.
• Do not immerse smoker in water.
• Do not spray inside of smoker with any kind of appliance cleaner.
• Do not cover or seal the racks or drip tray with aluminum foil. is can
cause severe damage to your smoker.
• Do not leave unattended when in use.
• Do not spray or clean the smoker with excessive amounts of water.
Instead use a damp cloth.
Maintenance Procedures
• Clean out the Drip Bowl. Dispose of all burnt Bisquettes carefully as they
may still be hot.
• Wash the Drip Tray, Racks, Bottom Rectangular Tray and Drip Bowl with
hot water and dish detergent or put them in the dishwasher.
• Remove food particles and grease residue from the smoker. If the inside
needs cleaning, wipe it with a damp cloth.
Note: e tower should have smoke or black residue on the inside. e more
residue, the better the product will taste.
• e Smoke Generator should be kept clean and free of wood chips
and grease at all times. If loose wood chips have collected in the Smoke
Generator, simply blow or vacuum these particles away. Unplug the Long
Power Cord before removing the Smoke Generator from the Smoke Tower.
Refer to “Remove Smoke Generator” in “Assembly Instructions”.
• e Bisquette Burner should be lightly scraped using a wire brush or scraper
to remove any residue that has been left by the burning process.
• Clean the Damper (at the top of the Smoker) to ensure it is not stuck.
• Wipe the Door Seal with warm water and dish detergent to remove any
leftover residues and food particles.
After Cleaning
• Replace Racks, Drip Tray, Bottom Rectangular Tray and Drip Bowl into
the smoker, making sure all parts are clean and dry.
• Insert the Smoke Generator back into the Smoke Tower.
• Make sure the Long Power Cord is unplugged.
3