Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
4
Assembly Instructions
P I N C H H A Z A R D
To reduce the risk of bodily injury from pinch hazard, keep hands and fingers away from hinges,
leg pivot points and moving parts. Only open the cart by gripping the top of each leg frame.
Read and follow these instructions to set up your grill.
CAUTION
!
Step 1
Attaching the Wheels and Casters
A.
Place the cart upside down on a clean flat surface. Insert an Axle through
a Wheel and both walls of the corner channel. Fasten in place by inserting an
Axle Pin through the small hole near the end of the Axle. Snap the Hubcap
on to the Wheel. Repeat for other Wheel.
Axle
Axle Pin
Hubcap
Step 2
Attaching Cylinder Bracket
Attach the Cylinder Bracket to the end of the Cart with 2) 1/4-20 x .47” Bolts,
oriented as shown.
Step 3
Attaching the Firebox Handles
Place the Handle between the brackets on the end of the firebox
and align the slot with the hole. For each side of the Handle, insert
a 1/4-20 Shoulder Bolt from the inside so that the shoulder is
through the slot in the handle and tight against the firebox bracket.
Fasten in place on the outside with a 1/4-20 Locking Nut. Repeat
for other Handle.
B. Attach the casters to the bottom of the
cart as shown with 4) 1/4-20 x .5” Bolts
each caster.
B
A