Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
20
How to Clean the Burners
1. Make sure the Control Knobs are turned “Off” and the grill is completely cooled.
2. Carefully remove Cooking Grids and Flavor Activators.
3. To remove each Main Burner, first remove the screw that fastens the burner flange to the firebox. (Fig. 13)
4. Gently lift the rear of the Burner. (Fig. 13) Slide the Burner towards the grill back to move the Venturi Hole off of
the Valve nozzle. (Fig. 14) Lift each Main Burner from the grill. To completely remove the burner from the grill,
disconnect the electrode wire from the back of the igniter box behind the control panel and carefully pull the wire
through the inside of the firebox
In order to prevent flashbacks, the Burner(s) should
be removed from the grill and cleaned periodically,
especially if the grill has been stored for an extended
period of time.
Valve nozzle
Burner
Venturi Tube
Valve
Control Knob
Spider webs or nest
inside Venturi Tube
Fig. 12
Fig. 14
View from inside
front body
Burner Venturi Hole fits centrally
around Valve nozzle.
Remove screws
Fig. 13
Lift Burner up and out.