Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
7
1. Remove ENCLOSURE COVER.
2. Close SUPPLY STOPS.
Note: Keep water flowing out of faucet while shutting off.
4. Unthread STRAINER (1) using a 7/16" socket.
5. Pull out the STRAINER (1) and clean with an old
toothbrush. Rinse thoroughly with water.
6. Install the STRAINER (1) back in its place and
tighten with a 7/16" socket.
Caution: do not over tighten strainer.
Note: It is recommended to clean strainer every 6
months.
7. Replace ENCLOSURE COVER. Tighten cover
screws firmly.
1. Remove AERATOR HOUSING (1) with KEY (2)
supplied with faucet.
3. Remove AERATOR (3) from HOUSING (1). Fig. 3a.
2. Clean the AERATOR SCREENS (4) with a old tooth
brush to remove dirt.
4. Rinse Clean with water. Reassemble and install into
spout end. Be sure the black seal washer is in place.
CLEAN
SCREENS
HOW TO CLEAN FILTER; Fig. 2
2
HOW TO CLEAN AND REMOVE
THE AERATOR; Fig. 3
3
Fig. 2
Fig.5
CAUTION
Before opening ENCLOSURE
disconnect AC power supply.
1
1
REMOVE
INSTALL
1
2
3
4
Fig. 3a
REMOVE
Fig. 3
M968857 REV.1.2