Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
4
ELECTRICAL
1
ELECTRICAL INSTALLATION
2
10
9
3
5
5
6
6
7
7
8
8
Fig. 1e
Fig. 1d
Fig. 1f
11
1212
1515
1414
Fig. 1g
Fig. 1h Fig. 1k
13
1111
1
Fig. 1c
1. Remove ENCLOSURE COVER (1). Fig. 1.
2. Remove CIRCUIT BOARD (2) from ENCLOSURE
(3). (May have to pull cord of power supply through).
Fig. 1.
3. Feed the WIRE CONNECTORS (4) through the top
of ENCLOSURE (3). Fig. 1b.
4. Remove SPLIT PLUG (5) from GROMMET (6).
Insert the gray SENSOR WIRE (7) and YELLOW and
GREEN CONNECTOR WIRES (8) into SPLIT PLUG
(5). Leave 4” of wire from end of SPLIT PLUG (5). Fig.
1c. Feed WIRES (7 & 8) through GROMMET (6). Push
SPLIT PLUG (5) into GROMMET (6) to seal. Fig. 1d.
5. Reinstall CIRCUIT BOARD (2) into ENCLOSURE (3)
with WIRES (7 & 8) under CIRCUIT BOARD (2). Insert
two WIRE CONNECTORS (9) into any of the three
CIRCUIT BOARD RECEPTORS (10). Fig. 1e.
6. Connect WIRE PLUGS (11) to SOLENIOD VALVE
(12). (Red to +, Blue to -). Fig. 1f.
7. Connect SENSOR WIRE CONNECTIONS (13) to
WIRE PLUGS (11). Red to +, Black to -). Fig. 1g.
8. Connect WHITE PLASTIC CONNECTOR (14) from
the faucet to the MOTOR CONNECTOR (15). Fig. 1h.
9. Replace ENCLOSURE COVER (1). Tighten cover
screws firmly. Fig. 1k.
Fig. 1
1
2
3
4
3
Fig. 1b
M968857 REV.1.2