Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Buy Weber Grill Parts. It couldn't be easier. Find your Weber parts here.
28
Step 30
Install glass doors
You will need: one LH glass door assembly and two RH
glass door assemblies.
Start with the LH door assembly. Insert the long hinge
pin at the top of the door into the plastic bushing in the
underside of the left frame. Insert the bottom (short)
hinge pin into the bushing in the frame connector.
Repeat the procedure with the RH door assemblies. The
glass doors latch on the frame connector. Figure 46.
Figure 46
Bushing in frame
connector and
short hinge pin
Bushing in the
underside
Bushing in underside
and long hinge pin
Step 31
Complete accessory installation
You will need: work table, serving tray, Warm-Up
Basket, warming rack, thermometer, two tubing plugs and
a hammer.
Insert one end of the Weber Warm-Up Basket into the
hole in the right end of the lid and the other end into the
slot in the left end of the lid. Figure 47 (a).
Set the work table onto the left side rails. Figure 47 (b).
Place porcelain serving tray on the work table.
Figure 47 (c).
Set the warming rack into the slots at the rear of the
cooking box. Figure 47 (d).
Insert the thermometer into its holder. Figure 47 (e).
Insert tubing plugs into the ends of the frame. To fully seat
the plugs, you may have to tap them lightly with a
hammer. Figure 47 (f).
Figure 47
(a)
(d)
(e)
(f)
(b)
(c)
ƽCaution: To keep the barbecue stationary, the
tabs on the locking casters should be in the
down position.