Viking Gas Grill Gas Grill User Manual


 
Battery Replacement (T-Series Models)
Each grill is equipped with a battery for the electronic ignition. The
30" W. models only have (1) battery located under the left hand side
of the control panel. All other models have (2) batteries located
under each end of the control panel. The battery locations are shown
on the control panel.
To replace the battery:
1. Slide out drip tray.
2. Locate round black cap which is inside the burner Box under the
battery symbol on the control panel.
3. Unscrew cap. Battery is snapped in the cap.
4. Replace the battery by connecting corresponding post to post
5.
inside burner box.
Snap cap on
battery and
screw back
into slot
underneath
control panel.
@ @.=.
Round black cap which holds battery is
located underneath control panel and
behind drip tray
Repladng Ught Bulbs (E-Seriesonly)
1. Remove screw and light bulb holder
from canopy housing. Metal
1. Unsnap glass light cover at opposite hinc
end from metal hinge.
2. Firmly grasp light bulb and pull out.
3. Replace with a 64405, 120V-25W
bulb.
4. Replace the light cover By first
sliding into metal hinge and then
snapping close on opposite end.
5. Reconnect power at the main fuse or
circuit breaker.
2O
Glass light cover
bulb
screw