Stoves 83306003 Outdoor Fireplace User Manual


  Open as PDF
of 44
 
IGNITION PROCEDURE
Prior to ignition:
Hotplate burner(s), position correctly
sized,atbottomedpan(s)directlyonto
the pan support above the selected
burner(s).
Wok burner (if tted)
a)Positionaatbottomedwokoracor-
rectlysized,atbottomedpandirectly
onto the pan support above the wok
burner.
b) Position the provided wok stand directly
onto the pan support above the wok
burner, then position a round bottomed
wok directly onto the stand.
Grill burner
Open the grill door and position the grill
pan into the selected runner position.
Remove the pan handle and leave the
door open.
Oven burner(s)
Ensure the oven shelves are positioned
into the selected runner positions. Close
the door(s).
For main oven fanned gas cooking, push
the convection fan button , prior to
preheating for 15 minutes.
Correct procedure for ignition of all
burners on this appliance.
Manual ignition (if applicable)
• Push in and keep depressed the igni-
tion button . Sparking to all gas
burners will commence.
• Push in and turn the selected gas
burnercontrolknobtothefullame
symbol or for oven burners, the
maximum temperature setting. Keep
the control knob depressed.
• As soon as the selected burner ignites
release the ignition button.
• Continue to hold the control knob in
for up to 15 seconds then release.
• If the burner fails to ignite within this
time, release the control knob and
wait 1 minute before attempting to
re-ignite.
Dual Switch (if tted)
PleaseNote:-
Yourproductmaybettedwithadual
switch, that operates both the ignition
and oven light, you will need to press the
switch to the upward position and keep
it depresed in order to follow the ignition
proceedures, and press it downwards to
operate the oven light, off is the middle
position.
Automatic ignition (if applicable)
• Push in and turn the selected gas
burnercontrolknobtothefullame
symbol . Keep the control knob
depressed. Sparking to the selected
burner will commence automatically.
Sparking will cease automatically
oncetheameisestablished.
• Continue to hold the control knob in
for up to 15 seconds then release.
• If the burner fails to ignite within this
time, release the control knob and
wait 1 minute before attempting to
re-ignite.
In the event of a power failure, or the
ignition not working, then a lighted match
or taper can be used to ignite the burner.
 previous next