Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Page 16 NDA-30016 Revision 3.0
MAT Assignments Roamer Installation Guide
AOKC Command: (Assignment of OAI Key Codes)
This command is used to associate the MSF facility and its operation code that was
configured in the APM for Roamer to one of the 14 OAI Key Codes in the MAT.
1. Select an unused OAI Key Code from 1 to 14. To determine what Key Codes
are available for assignment, use the LOKC command to list the AOKC Key
Codes that are already assigned.
2. Enter MSF as the facility to be assigned to the selected Key Code, using the val-
ues on the screen.
3. Enter the same Op-Code that was configured for Roamer in the APM. If neces-
sary, retrieve it using the Providers command on the APM Configuration Entry
screen.
AKY1 Command: (Assignment of D
term
Function Key)
This command is used to assign key data on the D
terms
that are to have access to
Roamer.
MAT Function Key Indexes #34 to #47 have been designated for use in the OAI
system and correspond to the 14 OAI Key Codes as illustrated on the previous
page. The AKY1 command is used to assign a D
term
function key to the specific
MAT Function Key Index that, in turn, corresponds to the previously assigned OAI
Key Code. This command must be used to assign the function key on each D
term
that is to be set up with access to Roamer.
1. Enter the same tenant number that is configured for Roamer in the APM Appli-
cation Configuration option (i.e., Tenant Number on page 8).
2. Enter the station number of the D
term
on which the function key is being as-
signed.
3. Enter to the D
term
function key field the MAT Function Key Index that corre-
sponds to the previously assigned OAI Key Code.