Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
NDA-30016 Revision 3.0 Page 5
Roamer Installation Guide Application Configuration
Chapter 2 Application Configuration
Roamer is configured into the APM system using the Add function of the
Application Configuration option on the APM System Administration menu:
1. Enter the APM option from the APM Platform Management Menu.
2. Enter the System Administrator password at the APM password screen.
3. Enter the Application Configuration option from the System Administration
menu.
This section contains the information that should be entered to the configuration
file for Roamer. For specific instructions on what these parameters mean and how
to make these entries, use the APM Operations Manual.
Step 1: Application Characteristics
In adding Roamer to the APM Application Configuration file, define it as an OAI
application that does not need a CRT or a communication queue, as shown below.
Note:
Entries for parameters that are marked with an asterisk (*) should be made ex-
actly as they are shown. All other entries in this guide serve only as examples.
Parameter Entry Description
OAI Application (Y,N) Y Y(es). Roamer is an OAI
application because it
communicates with the
NEAX2400 using OAI
processes.
CRT Application (Y,N) N (No). Roamer does not require a
terminal screen that is of the
same type as the one used by the
APM.
Communication Queue (Y/N) N (No). Roamer does not need an
IPC queue to communicate with
other processes.