Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
19
W415-0381 / E / 02.09.06
PHAZER
TM
logs and glowing embers, exclusive to Napo-
leon Fireplaces, provide a unique and realistic glowing ef-
fect that is different in every installation. Take the time to
carefully position the glowing embers for a maximum glow-
ing effect. Log colours may vary. During the initial use of the
fireplace, the colours will become more uniform as colour
pigments burn in during the heat activated curing process.
1. Place the cutout in the bottom of log #1 behind the pilot
assembly. Rest the log against the back wall of the firebox.
2. Move the two small logs (#2 & #3) into position, lining
up the studs located on the burner with the holes on the
bottom of the logs.
3. Tear the glowing embers into pieces and place along
a
DOOR LATCH
UPPER LOUVRE
SLOT
HINGE SCREEN
LOWER LOUVRES
(VALVE CONTROL DOOR)
b
B
A
FIGURE 38
UPPER LOUVRES
Insert the louvre tabs into the
slots located at the top left and
right corners of the unit.
SLOT
TAB
A
LOWER LOUVRES
Insert the hinge clips into the
slots located at the bottom left
and right corners of the unit.
To remove the louvres, pull the
back tabs of the clips forward,
while pushing the louvre assem-
bly back. Lift the clip.
B
HINGE
CLIP
SLOT
Remove the
backing of the
logo supplied and
place on the glass
viewing door, as
indicated.
FIGURE 39
L42 LOUVRE INSTALLATION
LOGO
½"
½"
FINISHING
GDL42 LOUVRE INSTALLATION
FIGURES 37
LOGO PLACEMENT
PORCELAIN REFLECTIVE PANELS
1. Remove the upper louvres, and open the glass door.
Remove the logs.
2. Remove the two securing screws located on either fire-
box side.
3. Place the left panel against the
left side of the firebox, ensuring
that it butts up to the rear panel.
Secure in place using 2 of the
screws previously removed. Re-
peat for the right side.
4. Replace the logs, glass door
and louvres.