Kenmore 141.16691 Gas Grill User Manual


  Open as PDF
of 34
 
Connecting Natural Gas To Your Grill
For Natural Gas grills: The 12 foot Natural Gas
Hose has already been connected to the Gas
Manifold as shown in Figure 7c. Thread the 12
foot Natural Gas Hose through the hole of Rear
Panel to outside. Also read the natural gas
safety instructions,(on page 4)
Figure 7c (Natural gas model only)
GAS MANIFOLD
\
REAR PANEL
j 12' NATURAL
J GAS HOSE
HOLE FOR
_12' NATURAL
GAS HOSE
Install Pull-out Grease Tray
Place Heat Shield into Putl-out Grease Draining
Tray. The Heat Shield must be present and
centered for your safety. Slide the PuIFout
Grease Draining Tray into the Tracks on the Cart
Side Panels and push until it stops.
See Figure 8.
Figure 8
GRbLL HEAD
HEAT
SHIELD
'\
\
\
PULL_3UT GREASE
DF_',JNbNG TRAY
CART SIDE
PANEL-RIGHT
Congratulations
Your Kenmore Elite gas grill is now ready
for use. Before the first use and at the
beginning of each season (and whenever the
LP gas tank has been changed):
1. Read all safety, lighting and operating
instructions.
2. Check Gas Valve Orifices, Burner Tubes
and Burner Ports for any obstructions.
3. Perform gas leak check according to
instructions found on page 15 of this
manual.
14
 previous next