Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Outdoor Lifestyles by Hearth & Home Technologies Inc. • 4070-300 Rev C • 4/11
30
G. Starting a Fire
Place crumpled or twisted paper under the replace grate.
Loosely arrange kindling or small pieces of wood to form a
layer above the paper.
The res must be built on the replace grate, without danger
of the burning fuel falling out of the replace opening.
Light the paper and add small pieces of wood until a hot bed
of embers has been established.
After establishing the re bed, and the small rewood is
burning briskly, add a minimum of three average sized piec-
es of split rewood, place the wood in such a manner to al-
low combustion air and ames between them.
Note: When rst lighting your replace, it may be necessary
to pre-warm the ue to establish a draft. This is done by
holding a rolled up piece of burning newspaper under the
ue damper for a few moments. This will help reduce smoke
spillage during start-up.
Note: The rst three or four res should be of moderate size
to allow the oils and binders to be burned from the replace
and the refractory and paint to cure. You may notice an
industrial odor the rst few res. This is considered normal.
Odors and vapors released during initial operation.
• Curing of high temperature paint.
• Open windows for air circulation.
Odors may be irritating to sensitive individuals.
CAUTION
Fire Risk
Keep combustible materials, gasoline and
other ammable vapors and liquids clear of
replace.
• Do NOT store ammable materials close
to the replace.
• Do NOT use gasoline, lantern fuel,
kerosene, charcoal lighter uid or similar
liquids to start or “freshen up” a re in this
replace.
• Keep all such liquids well away from the
replace while it is in use.
Combustible materials may ignite.
WARNING