Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Assem
ly Step 2
Burner
Chamber
Assembly
Cabinet
Assembly
1/4-20 x 3/8" Bolts 1/4-20 Nuts
3 Required 3 Required
m
Phillips Head
Screwdriver
1. With the cabinet in the upright
position, begin by removing
the door panel from the
cabinet assembly by lifting it
from the hinges. Set the door
panel aside. This will make
assembly much easier.
2. Set the cabinet assembly top side down. To
prevent scratching or damaging your smoker, set
the cabinet on a padded surface such as cardboard
or carpet. The top of the cabinet has the vent holes;
the bottom has mounting holes for the legs.
3. Insert the Burner Chamber Assembly upside down
through the bottom of the Cabinet as shown. Be
sure the front mounting tab and venturi tube
opening is facing the front of the cabinet.
4. Line up the bolt holes and insert the bolts
from the inside of the Cabinet as shown.
Loosely thread on the nuts to hold the
assembly in place. At this time, DO NOT
tighten the bolts completely.
TOP