Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
14
CARE OF STAINLESS STEEL COMPONENTS
Your Barbecue may have a stainless steel oven and front
panel. The following care instructions will keep your unit
looking and working like new. Stainless steel components are
constructed of the finest prime grade type 304 stainless steel.
Meticulous attention has been given to maintain the attractive
finish throughout the manufacturing process. Like the stainless
steel used in commercial kitchens, your Barbecue requires
regular cleaning and occasional buffing to maintain its bright,
clean appearance.
Deposits of dirt and grease can be removed easily with Fire
Magic Foaming Barbecue and Grill Cleaner*. Deposits
should be removed before they are allowed to bake onto the
finish. To remove more stubborn deposits, use a scouring pad
recommended for stainless steel. Be sure to always rub in the
direction of the polishing lines (Figure 15). Oven cleaner may
be used, according to manufacture's instructions, to remove
cooked-on food deposits. Special cleaning agents and polishing
pads recommended for stainless steel are available at your
local Barbecue dealer, hardware store or supermarket.
CAUTION: Never use ordinary steel wool or steel brushes on
stainless steel. Tiny particles left behind may rust and stain the
finish. Abrasive pads recommended for restoring the grain in
stainless steel will, over a period of time, scratch or dull the
surface of glass or porcelain-coated products.
BURNER MAINTENANCE
Fire Magic Burners are constructed of heavy-duty cast stainless
steel and have a lifetime warranty (cast brass and porcelainized
cast iron Burners are also available). Once a year inspect the
Burners to insure that the ports are clear of debris.
CARE OF YOUR FIRE MAGIC BARBECUE
Figure 16 - Cover for Built-in Barbecue
COOKING GRIDS
Fire Magic Cooking Grids come in two types: Stainless Steel
and Porcelain-Finished Cast-Iron Grids. Both are finished with
a special matte (satin) finish. This matte-finish provides a more
stick-resistant cooking surface that makes outdoor barbecuing
easy and enjoyable. The Stainless Steel Cooking Grids are
made of type 304 stainless steel, and the coating on the
Porcelain-Finished Grids provides a cooking surface that
resists corrosion and increases cooking grid durability,
providing years of cooking enjoyment. For best cooking
performance, the wide side of the grid bars should face up.
Follow the simple steps of Care and Maintenance after every
use.
CARE AND MAINTENANCE
(Stainless Steel Grids)
To maintain your Stainless Steel Cooking Grids, we recommend
lightly brushing the grids after use with a brass or stainless
steel wire brush. Before use, brush again if necessary and
spray a light coat of vegetable oil over the cooking surface.
Discoloration or stubborn food particles can be removed with a
heavy-duty abrasive or stainless steel scouring pad. Grills
can also be washed in an automatic dishwasher or cleaned
with strong cleaning solutions, including oven cleansers. We
do not recommend ordinary steel or wire brushes, which may
leave tiny metal particles on the grids which cause discoloration,
but not permanent damage.
(Porcelain Coated)
A spray coat of vegetable oil and light brushing with a brass grid
brush before and after use is all it takes to maintain cooking
readiness and ensure long life.
PROTECTING THE WHOLE BARBECUE FINISH
Barbecue covers* will protect the finish and extend the life and
appearance of Fire Magic Barbecues equipped with smoke
ovens. The covers are designed to protect the finish against
scratches, corrosion and oxidation. Each cover has been cut
and sewn by hand to fit a particular smoke oven model. Flaps
extend from the sides and back. In windy areas, place weights
on the flaps or inside the sleeve on the flaps to keep the cover
from blowing off.
Visit our Website at www.rhpeterson.com to view our
full range of Fire Magic and Real-Fyre products and
accessories.
Robert H. Peterson Co. • 14724 East Proctor Ave. •
• City of Industry, CA 91746 •
*Accessories and replacement parts may be obtained
from your nearest Fire Magic Dealer.
For assistance in locating a dealer, please contact our
factory at the address listed below.
*Available from your nearest Fire Magic Dealer
WIPE WITH GRAIN
Figure 15 - Always rub with the grain
REPLACING THE SPARK GENERATOR BATTERY
1. Remove the rubber cap by depressing and turning the cap
counterclockwise.
2. The battery is now accessible for removal and replacement.
3. Make sure that the battery spring is re-installed with
the new battery.