Desa (V)K36N Outdoor Fireplace User Manual


 
www.desatech.com
111923-01D28
SPECIFICATIONS
(V)K36N(H) (V)K36P(H)
Btu 19,000/27,000 Btu/hr 18,000/26,000 Btu/hr
Gas Type Natural Propane/LP
Ignition Piezo Piezo
Manifold Pressure 3.5" w.c. 10.0" w.c.
Minimum Inlet Supply Pressure 5.5" w.c. 11.0" w.c.
Dimension, Inches/mm (HxWxD)
Fireplace (Actual size of
rebox. Measurements do not 36" x 41" x 21
1
/8" 36" x 41" x 21
1
/8"
include nailing anges or 91.4 x 104.1 x 53.7 cm 91.4 x 104.1 x 53.7 cm
standoffs).
Carton 38" x 44" x 22" 38" x 44" x 22"
96.5 x 111.8 x 55.9 cm 96.5 x 111.8 x 55.9 cm
Weight, lbs/kg*
Fireplace 165 lbs/75 kg 165 lbs/75 kg
Shipping 168 lbs/76 kg 168 lbs/76 kg
SERVICE HINTS
When Gas Pressure Is Too Low
pilot will not stay lit
burners will have delayed ignition
replace will not produce specied heat
propane/LP gas supply might be low (propane/LP units only)
You may feel your gas pressure is too low. If so, contact your local
gas supplier.
TECHNICAL SERVICE
You may have further questions about installation, operation, or
troubleshooting. If so, contact DESA’s Customer Service Depart-
ment at 1-866-672-6040. When calling please have your model and
serial numbers of your heater ready.
You can also visit DESA’s technical service web site at
www.desatech.com.
REPLACEMENT PARTS
Note: Use only original replacement parts. This will protect your
warranty coverage for parts replaced under warranty.
PARTS UNDER WARRANTY
Contact authorized retailers of this product. If they can not supply
original replacement part(s), call DESA’s Customer Service Depart-
ment at 1-866-672-6040.
When calling DESA, have ready
your name
your address
model and serial numbers of your replace
how replace was malfunctioning
type of gas used (propane/LP or natural gas)
purchase date
Usually, we will ask you to return the part to the factory.
PARTS NOT UNDER WARRANTY
Contact authorized retailers of this product. If they can not supply
original replacement part(s), call DESA at 1-866-672-6040 for
referral information.
When calling DESA, have ready
model number of your replace
the replacement part number