Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Grill Assembly
9
2. Carefully place the Grill Lid
onto the grill frame in the
closed position (Fig. 20).
1. Hardware to attach the grill
lid are two pins and hairpin
cotters (Fig. 19).
Fig. 19
3. Insert each pin through the
lid and windscreen (Fig. 21).
Raise the lid slightly to help
align the holes.
Fig. 21
Fig. 20
4. Carefully raise the lid to the
open position (Fig. 22).
Fig. 22
Assemble the Grill Lid
5. Install one hairpin cotter on
each pin (Fig. 23).
Fig. 23
1. Hardware to attach the thermometer are two wing nuts. Finger tighten
the wing nuts on the inside of the lid. DO NOT OVERTIGHTEN
the wing nuts (Fig. 24 and 25).
Fig. 24
Assemble the Thermometer
Fig. 25
Fig. 26
Assemble the Warming Rack
and the Grease Tray
Fig. 27
Fig. 28
1. Insert the ends of the Propane
Tank Retainer into the holes
provided in the right side panel
(Fig. 29). Use the pins
provided with the Retainer to
secure the Retainer in place.
Fig. 29
Assemble the Propane Tank Retainer
1. Insert the ends of the Wire Shelf into the holes provided in the
back panel. Use a screwdriver to attach the shelf to the base
with two screws (Fig. 30).
Assemble the Wire Shelf
Fig. 30