Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
18
2. Remove the cooking grates and heat tents and set aside.
Using a screwdriver, remove the single screw holding each
burner tube. There is a hex nut under each burner bracket. It is
necessary to hold the hex nut when removing the screw. Lift the
burner tube away from the valve and remove from the grill.
Repeat for the other burners and set aside (Fig. 55).
Fig. 55
3. Look inside end of venturi tubes for nests, webs or mud.
If present, clean as shown in Step 1, Fig. 54.
4. Inspect and clean the burner if needed.
5. Replace the burners in the operating position.
6. Make sure the venturi is properly positioned on the burner
tube, and that the venturi is properly positioned over the valve
orifice (Fig 56).
Fig. 56
Burner
Tube
Venturi
Tube
7. Reinstall the burners, heat tents and the cooking grates.
Valve
Orifice
REPRESENTATIVE ILLUSTRATION
REPRESENTATIVE ILLUSTRATION