Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
English - 6
■ Screw propane
bottle into
regulator hand
tight. (Fig. 11)
■ Remove
protective cap
from top of
propane cylinder.
Save cap for use
in storing.
(Fig. 10)
■ Check and clean the burner/fuel
tubes for insects and insect nests.
A clogged tube can lead to a re
outside the appliance.
Burner and Orifice
Fig. 11
Fig. 10
■ Never operate
grill with propane
cylinder in an
inverted position.
(Fig. 12)
■ Proper location of the burner with
respect to the orice is important.
To verify the proper installation of
the burner tube, remove the cooking
surface and the cooktop. The burner
tube, fuel tube, and orice (on the
regulator) should be positioned as
shown in Fig. 13.
■ Turn off regulator
valve. (Fig. 8)
■ Install grease tray into position below
the grill from the back side. (Fig. 5)
■ Assemble the
igniter through
the hole in the
left side of the
grill. (Fig. 3)
■ Install the cooking surface. (Fig. 6)
■ Install the warming rack. (Fig. 7)
■ Firmly snap regulator into grill. (Fig. 9)
Fig. 3
■ Plug the round
electrical
connector to
the round jack,
and the at
one to the at
jack. (Fig. 4)
Round
Flat
Fig. 4
Fig. 5
Fig. 6
Fig. 7
PUSH
to T
urn On
& Off
LOW
OFF
HIGH
Fig. 8
Fuel Tube
Orifice
Burner
Fig. 13
Fig. 12
Fig. 9