Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
B101748-1-0512Page 16
GRILL ASSEMBLY
Connect Igniter Wires and
Install Battery
1. Attach ground and igniter wires to the igniter as shown
in Figure 15.
2. Remove push button cap and insert AA battery, positive
side down, as shown in Figure 15.
Figure 15
Install the Burner
1. Insert the burner assembly into the grill bottom with the
venturi tubes facing the front of the grill. See Figure 12.
2. Carefully slide the wires through the same hole in the
bottom of the grill.
Figure 12
3. Slide the venturi on to the valve assembly.
4. Raise the unsecured end of the burner bracket and slip
it over the 1/4-20 x 1 1/2 Phillips Truss Head Screw as
shown in Figure 13. The screw will t into the hole on
the burner bracket.
Figure 13
5. Slide the bridge pin through the hole in the 1/4-20 x 1
1/2 Phillips Truss Head Screw as shown in Figure 14.
Figure 14