Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
B101748-1-0512Page 12
Pressure Regulator and Hose Assembly
The pressure regulator has an outlet pressure of not more than eleven (11") inches water column. It must be connected to
the Propane gas cylinder’s valve outlet before the grill can be operated.
Caution: Operation of a Propane gas grill without the pressure regulator and hose assembly will cause gas leaks
which could lead to re or explosion, resulting in property damage or personal injury.
The pressure regulator’s tting must remain clean and free of nicks and scratches. A dirty, nicked or scratched tting can
cause a gas leak, resulting in an explosion or re. Use only genuine Broilmaster replacement parts unless otherwise speci-
ed by the manufacturer.
Connecting to Propane Gas / Cylinder Retention Means
ATTENTION: Propane gas cylinders that are acceptable for use with this grill must comply with Cylinder Requirements,
Page 10, and Connection Requirements, Page 11.
Position the cylinder in the opening in the bottom of the cart and secure with the cylinder retaining bracket. See Figure 2.
Attach the pressure regulator to the Propane gas cylinder’s
valve using the plastic handwheel. Tighten in a clockwise
motion to achieve a gas tight seal. See Figure 3.
Caution: Do not use a wrench or any other tool to
tighten. Use of a wrench or other tool will damage the
plastic handwheel.
To disconnect the Propane gas cylinder, turn OFF the cylin-
der’s valve and the grill’s control valve. Remove the regulator
by turning the plastic handwheel counterclockwise.
Caution: Assure hose does not touch the casting
or mounting components.
CLOCKWISE
Figure 3
Figure 2
PROPANE GAS GRILLS