Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
6
Product Features
1. LED work light
2. Variable speed trigger
3. Battery
4. Forward/Reverse switch
5. Soft grip handle
6. Battery lock button
Assembly
Selecting Correct Socket
Always use the correct size socket for bolts and nuts.
An incorrect size socket will result in inaccurate and inconsistent
fastening torque and /or damage to the bolt or nut.
Installing or Removing Socket
Always be sure that the tool is switched off and the battery pack is
removed before installing or removing the socket.
To install the socket, push it onto the anvil of the tool until it locks
into place. To remove the socket, simply pull it off.
Operation
Loosening nuts and bolts
Install socket as shown above. Place impact wrench and socket over nut or bolt making sure you have the
correct size and type of socket needed. Be sure impact wrench and socket are square with the nut or bolt.
Switch impact into the counter-clockwise direction and pull the variable speed trigger switch until nut or bolt is
removed. For stubborn nuts or bolts, a loosening agent may be needed prior to removing.
Tightening nuts and bolts
Start your nut or bolt by hand to ensure that you are not cross threading it. Be certain all threads are clean and
free of defects before tightening. After hand starting your nut or bolt, place impact wrench and socket over nut
or bolt making sure you have the correct size and type of socket needed. Be sure impact wrench and socket
are square with the nut or bolt. Switch impact into the clockwise direction and pull the variable speed trigger
switch until nut or bolt is tightened.
1
2
3
4
5
6