Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
4
4. Drilling in Plastic
For drilling in plastic use a steel drill bit and follow the same instructions as for drilling in wood.
5. Drilling in Stone, Brick, Masonry
For drilling in walls, stone, masonry etc. use a masonry-bit. Do not put too much pressure on the machine.
Follow the same instructions as for drilling in metal.
6. Using the drill as a screwdriver
Before using the machine check whether the screwdriver bit is inserted correctly. Avoid over-tightening screws,
otherwise the screw head may be damaged or stripping of the threads may occur.
7. Screw insertion
Set the direction of rotation of the drill to the clockwise direction. Insert the screwdriver bit into the slot in the
head of the screw. Hold the screw bit perpendicular to the head of the screw, otherwise the screw or the screw
head may be damaged. Press the screw bit against the screw with a constant pressure while driving in the
screw. When the screw is completely screwed in, hold the drill firmly and release the On/Off trigger, otherwise
the screw or the screw head may be damaged. If the On/Off trigger is not released immediately, high torque
could also damage the drill bit or the drill.
8. Screw removal
Set the direction of rotation of the drill to the counter-clockwise direction. Insert the screw-bit into the slot in the
head of the screw. Hold the screwdriver bit perpendicular to the head of the screw, otherwise the screw or the
screw head may be damaged. Press the screw bit against the screw with a constant pressure while removing
the screw.