ATD Tools ATD-10528 Grill Accessory User Manual


 
14
To Detach Battery Pack
z Depress both battery-release buttons located on the side of the battery pack to release
the battery pack.
z Slide the battery pack back to remove it from the tool.
CAUTION: When placing battery pack in your cordless impact wrench, be sure raised rib on battery pack
aligns with groove in wrench’s battery port and latches snap in place properly. Improper assembly of
battery pack can cause damage to internal components.
BATTERY PROTECTION
The circuitry protects the battery pack from extreme temperature, over discharge, and over-charge. To
protect the battery from damage and prolong its life, the battery pack circuitry will turn off the battery pack
if it becomes overloaded or if the temperature becomes too high during use. Both red and green LED light
will turn on when the battery fully charged.
General Safety Rules
WARNING
Read all safety warnings and all instructions. Fail to follow all warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference
The term “power tool” in the warnings refers to your electrically operated (corded) power tool or battery
operated (cordless) power tool.
1) Work area
a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can inhibit
accidents.