Agri-Fab 45-02402 ATV Outdoor Cart User Manual


  Open as PDF
of 20
 
4
ASSEMBLY INSTRUCTIONS
FIGURE 2
5. Positionthetailgatereinforcementbracketonoutsideof
cartasshowningure3.Assembletothebottomofthe
cartbodyusingfour5/16"x3/4"trussheadboltsand
5/16"nylocknuts.Do not tighten yet. Seegure3.
6. Positionthetailgateguidesontheinsideofthecartbodies
withguidechannelstothefrontasshowningure3.
Assembleusingfour1/4"x3/4"hexboltsand1/4"nylock
nuts. Do not tighten yet. Seegure3.
FIGURE 3
FIGURE 4
7. Atthistime,withthecartbodyhalvespulledtogether,
tightenthefourtrussheadboltsassembledinstep5
andthenthefourhexboltsassembledinstep6.Leave
loosefornowtheboltsthatwereassembledinstep4.
8. Carefullyreversethepositionofthecartsothatitrests
ontheendwiththejustassembledtailgatereinforcement
bracket,asshowningure4.Proceedwiththeassembly
stepswhichfollow.
DO NOT LEAVE THE CART UNATTENDED IN
UPRIGHT POSITION DURING ASSEMBLY. A
FALLING CART CAN CAUSE PERSONAL INJURY!
PAY CLOSE ATTENTION TO THE STABILITY OF
THE CART WHILE IT REMAINS IN AN UPRIGHT
POSITION. FOR BEST STABILITY, ASSEMBLE
ON A SMOOTH, LEVEL SURFACE.
CAUTION
TOOLS REQUIRED FOR ASSEMBLY
(1) Screwdriver
(1) Pliers
(2) 7/16"Wrenches
(2) 1/2"Wrench
(2) 9/16"Wrenches
(1) Grease Gun
1. Remove the hardware pack and all loose parts
fromthecarton.Besurethecartonisemptybefore
discarding.
2. Layoutallthepartsasshowninthecartoncontents.
3. Position cart body halves upright on asmoothlevel
surfacesuchasagarageoororapaveddriveway.
Seegure2.
4. Assemblehalvestogetherusingthree1/4"x3/4"hex
boltsand1/4"nylocknutsasshowningure2.Do not
tighten yet.
1/4" x 3/4" HEX BOLT
1/4" NYLOCK NUT
1/4" x 3/4"
HEX BOLT
5/16" x 3/4"
TRUSS HEAD BOLT
5/16" NYLOCK NUT
1/4" NYLOCK NUT
TAILGATE
REINFORCEMENT
BRACKET
TAILGATE GUIDE
ENGLISH
 previous next