Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
2-2 Windows Driver Installation
Copyright © 2006 by LSI Logic Corporation. All rights reserved.
The system BIOS must support booting from a CD-ROM. BIOS
settings might require changes to allow CD-ROM booting. See
your system documentation.
Step 2. Press F6 when the following displays at the bottom of the
screen:
"Press F6 if you need..."
Note
: You must press F6 for the system to recognize the new
driver.
Step 3. Select “S” to specify an additional device when the
screen displays:
"Setup could not determine the type of one or more
mass storage devices..."
The system prompts for the manufacturer-supplied hardware
support disk.
Note
: If the screen does not display this message after you press
F6, then the setup program did not recognize the F6
command. Reboot the system, and return to step 2.
Step 4. Insert the driver diskette containing the Windows device driver
and press ENTER.
Step 5. Select the appropriate Windows adapter from the menu by
using the arrow key to highlight it, and then press ENTER to
proceed.
Step 6. Press ENTER again to proceed.
Step 7. Return to the Windows Setup screen.
Windows displays a “Welcome to Setup” window.
Step 8. Press ENTER to continue.
Step 9. Press C to continue the Microsoft Windows installation
procedure.
Step 10. Follow the Windows installation procedure.
Step 11. Repeat this process for all the adapters on your system.