Weber PERFORMER TOUCH-N-GO IGNITION Charcoal Grill User Manual


 
7
Tools needed
Phillips screwdriver
7/16 inch and 7/8 inch or an adjustable wrench
Pliers
Hammer
Block of wood
Supplies needed
Your LP tank is shipped empty for safety. You will
need to fill it (See Step "Fill LP tank").
You will need a soap and water solution to check for gas
leaks.
Packages
Your Weber Performer Grill comes in a large box
(shipper) which includes a top box, and bottom carton.
There is a hardware pack of small parts and hardware
that will be found in the bottom carton.
Note - The hardware size of nuts, bolts and screws is
given. For example "1/4-20 x 1/2 inch bolt" means a bolt
1/4 inch in diameter with 20 threads to the inch, 1/2 inch
long. On a small screw, "8-18 x 5/8 inch screw" means a
number 8 screw, with 18 threads to the inch, 5/8 inch
long.
Check package contents
The following item will be found in the top box.
Bottom rack
The following items will be found in the large box
(shipper).
CharBin Storage Container
Bowl assembly
Lid assembly
ASSEMBLY INSTRUCTIONS
While we give much attention to our products,
unfortunately an occasional error may occur. If a part
is missing, do not go back to the store. Call the Weber
Customer Service Center toll free 1-800-446-1071 to
receive immediate assistance. Have your owner’s
manual and serial number available for reference.
Ash catcher assembly
Two Char-Basket
Fuel Holders