Weber PERFORMER TOUCH-N-GO IGNITION Charcoal Grill User Manual


 
24
Problem
Burner burns with a yellow or orange
flame, in conjunction with the smell of gas.
Burner does not light, or flame is low.
Burner flame pattern is erratic.
Inside of lid appears to be “peeling.”
(Resembles paint peeling.)
CharBin slides out of the frame brace.
Check
Inspect burner for possible
obstructions.
Is flow limiting device activated?
Is LP fuel low?
Is fuel hose bent or kinked?
Does the burner light with a match?
Is test valve open?
Is the burner clean?
The lid is porcelain-on-steel, not
paint. It cannot “peel.” What you are
seeing is baked on grease that has
turned to carbon and is flaking off.
THIS IS NOT A DEFECT.
The position of the Cooking grate
holder. It may be sitting on the frame
brace incorrectly.
Cure
Clean burner. See Section
"Maintenance."
(See Section "Lighting
Instructions".)
Refill LP tank.
Straighten fuel hose.
If you can light the burner with
a match, then check the
Ignition System. See Section
"Maintenance."
Turn test valve to the open
position.
Clean burner, See Section
"Maintenance."
See Section "Periodic
Cleaning."
Repostion the Cooking grate
holder. See Step 12.
TROUBLESHOOTING & MAINTENANCE
Troubleshooting