Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Buy Weber Grill Parts. It couldn't be easier. Find your Weber parts here.
26
Step 24
Install left work surface and glides
You will need: left work surface, two nylon (plastic)
glides, two Phillips head 1/4-20 x 1 inch machine
screws and a Phillips screwdriver.
Set the left work surface over the top of the cooking box
and the top frame rails. Figure 36. The left work surface
will cover half of the handles on the left side.
Position the glide as shown in figure 36 (a). Align the
front hole in the left work surface and the glide.
Thread screw in and tighten with a Phillips screwdriver.
Figure 36 (b).
Repeat the procedure with the second glide at the rear
of the left work surface.
ƽWARNING: The load limit for the work surface is
25 pounds.
Step 25
Install right work surface and glides
You will need: right work surface, two nylon (plastic)
glides, two Phillips head 1/4-20 x 1 inch machine
screws and a Phillips screwdriver.
Set the right work surface over the top of the cooking
box and the top frame rails. Figure 37. The right work
surface will cover half of the handles on the right side.
Position the glide as shown in figure 37 (a). Align the
front hole in the right work surface and the glide.
Thread screw in and tighten with a Phillips screwdriver.
Figure 37 (b).
Repeat the procedure with the second glide at the rear
of the right work surface.
ƽWARNING: The load limit for the work surface is
25 pounds.
Figure 36
(a)
(a)
(b)
(b)
Figure 37