Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Buy Weber Grill Parts. It couldn't be easier. Find your Weber parts here.
15
Step 9
Bolt back panel and back top frame rail
assembly
You will need: back panel, two nylon washers,
two 1/4-20 x 1/2 inch bolts and frame assembly.
Position back panel cut outs to the top and the flanges
to inside of the frame assembly. Figure 11 (a).
Figure 11
Figure 12
(a)
(a)
Wheel frame
Flange
Cut out
Caster frame
Align hole of back panel and wheel frame and tab of top
frame rail assembly. Slip washer over bolt and start
bolt. Figure 12 (a).
Note: If there are no threads for the bolt to thread into:
a) you may not have the holes of the back panel,
frame, and top frame rail tab aligned.
b) the tabs of the top rail may not be to the inside of the
cart. Refer to Figure 9.
Repeat with second bolt aligning back panel and hole in
caster frame and tab of top frame rail assembly.
Slip washer and start bolt.
Tighten both bolts with 7/16 or adjustable wrench.