Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Buy Weber Grill Parts. It couldn't be easier. Find your Weber parts here.
18
Figure 10
3/8 inch x 1 1/2 inch lag bolt
3/8 inch flat washer
Mount plate
Drilled hole
Figure 9
1
2
3
4
Typical installation of the base for an existing
concrete patio, new pad or wood deck
(continued)
Method 4 - Wood deck
After assembling the base according to the assembly
instructions, position the base assembly on your deck
for anchoring.
ƽCAUTION: Combustible materials should never
be within 24 inches of the top, bottom, back or
sides of the barbecue. Do not locate under
overhead combustible construction.
ƽCAUTION: For a deck installation, it is
recommended to anchor one screw into a joist.
Note - With the lid open, the depth of the barbecue
is 28 inches, front to back.
Anchor the base to the deck. We recommend using a
minimum of a 3/8 inch x 1 1/2 inch lag bolt with a 3/8
inch flat washer. Figure 9.
Note - Use a 3/16 inch drill bit for drilling a pilot hole
for a 3/8 inch lag bolt.
ƽWARNING: Whichever method used, the base
must be bolted down (anchored) at a minimum of
four anchoring points (two per side) prior to
barbecue assembly. One anchor in each corner of
the base plate. Figure 10.