Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Buy Weber Grill Parts. It couldn't be easier. Find your Weber parts here.
Step 10
Connect barbecue gas supply line to the natural
gas supply
Note - We recommend that the connection between
the barbecue gas supply line and the natural gas
supply be flare to flare. A 3/8-inch flare fitting has
been included with the barbecue gas supply line of
your gas barbecue. The fitting is loosely connected
for shipping and should be removed before
installation.
You will need: barbecue gas supply line, 3/8 inch flare
fitting, 3/4 inch and 11/16 inch wrenches.
ƽWARNING: This barbecue is NO
T portable. It must
be bolted down at all times when it is connected to a
natural gas supply.
Unscrew the 3/8 inch flare fitting from the barbecue gas
supply line. Apply pipe sealant to the threads of the
pipe fitting. Screw the pipe fitting end of the 3/8 inch
flare fitting into the natural gas supply pipe. Tighten with
an 11/16 inch wrench. Figure 17 (a).
Attach the flare nut on the barbecue gas supply line to
the flare fitting end of the 3/8 inch flare fitting. Tighten with
a 3/4 inch wrench. Figure 17 (a).
Attach the flare nut at the other end of the barbecue gas
supply line to the manifold fitting. Tighten with a 3/4 inch
wrench. Figure 17 (b).
Figure 17
(a)
(b)
Natural Gas
Supply Pipe
Pipe fitting end
of 3/8-inch
Flare Fitting
Flare fitting end of
3/8-inch Flare Fitting
Barbecue gas
supply line
Apply pipe
sealant here
19
Step 9
Install igniter
Note - The igniter wires are already attached to the Gas
Catcher Ignition Chamber and the igniter. This was done to
factory test the ignition system.
The igniter lock nut is on the igniter.
Insert the top of the igniter up through the large part of
the keyhole in the frame brace. Figure 16 (b). Loosen the
igniter lock nut and slide the igniter into the small part of
the keyhole. Figure 16 (c). Tighten the igniter lock nut.
Figure 16.
Note - If the igniter works loose, carefully tighten the igniter
lock nut with an adjustable wrench or pliers.
Figure 16
Igniter lock nut
Keyhole in
frame brace
Small part of keyhole
in frame brace
Frame brace
Frame brace
(a)
(b)
(c)