Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
VTEC GAS INFRARED CHARBROILER PARTS AND SERVICE
-
9 -
5. Remove manifold retaining screw at back of
unit. Fig. 6.
6. Remove manifold assembly from unit. Fig 7.
7. Measure distance between manifold pipe and
valve to reference for reassembly later.
8. Unthread orifice extension and burner valve from
manifold.
9. Reverse steps to reinstall burner valve. The
distance between the burner valve and manifold
should match previous dimensions so that the
burner valve outlet is centered in the burner
venturi. The gap between the orifice and the end
of the burner venturi should be no more than ¼”.
Refer to Fig. 8 for correct burner valve and
orifice positioning.
All gas supply connections and
any pipe joint compound must be resistant to
the action of propane gases.
Prior to lighting, check all
j
oints in the gas supply line for leaks.
Use soap and water solution. Do not use
an open flame.
BURNER BOX ASSEMBLY REPLACEMENT
Shut off the gas supply
before servicing the unit.
1. Turn the main gas shut-off valve and the
individual burner control knobs to the OFF
position.
2. Remove inner shield assembly, emitter panel,
grate and shelf.
¼” max
Fig. 8
Fig. 6
Fig. 7
Remove screw