Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
VTEC GAS INFRARED CHARBROILER PARTS AND SERVICE
-
12 -
TROUBLE SHOOTING
Uneven heating A. Burner valves improperly adjusted
B. Fluctuating gas pressure
C. Appliance is not level
D. Emitter panels are not properly seated or damaged
E. Emitter panels are excessively dirty
Too much top heat A. Faulty hood ventilation
C. Overrated gas pressure
D. Unit is excessively dirty
E. Emitter panels are not properly seated or damaged
Uneven heat side to side A. Burner valves improperly adjusted
B. Appliance is not level side to side
C. Crumb tray is not pushed all the way in
D. Emitter panels are not properly seated or damaged
E. Emitter panels are excessively dirty
Uneven heat front to back A. Appliance is not level front to back
B. Faulty hood ventilation
C. Crumb tray is not pushed all the way in
D. Emitter panels are not properly seated or damaged
E. Emitter panels are excessively dirty
F. Designed air flow pattern obstructed
Burner not lighting A. Check that igniter electrode is sparking when igniter
knob is turned clockwise
B. Check for damaged, loose or dirty igniter wires, igniter
and electrode
C. Check that at igniter terminal connections are connected
to an electrode wire or grounding wire. Should be no
empty terminals.
D. Burner valve not on MAX setting
E. Gas pressure too low
F. Inside burner box or burner venturi excessively dirty
Burner flames too low A. Burner valves improperly adjusted
B. Gas pressure too low
C. Inside burner box or burner venturi excessively dirty
D. Clogged burner orifice
Burner flames to high A. Emitter panels are not properly seated or damaged
B. Gas pressure too high
Fluctuating gas pressure
A. Checked for clogged vent on regulator
Flames in burner venturi
A. Appliance is not level
B. Gas pressure not set properly
C. Waiting too long before igniting burner
D. Not following lighting instructions - See I&O Manual
F-38330.