Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
VTEC GAS INFRARED CHARBROILER PARTS AND SERVICE
-
11 -
The charbroiler and its parts are hot. Use care when operating,
cleaning or servicing the charbroiler.
BURNER REPLACEMENT
1. Turn the main gas shut-off valve and the
individual burner control knobs to the OFF
position.
2. Remove inner shield assembly, emitter panel,
grate and shelf.
3. Remove the four nuts that are securing the
burner to the burner box assembly. Fig. 12.
4. Lift the burner slightly, then slide to the rear of
the unit and lift out. Fig. 12.
IGNITER ELECTRODE REPLACEMENT
1. Turn the main gas shut-off valve and the
individual burner control knobs to the OFF
position.
2. Remove inner shield assembly and shelf
3. Disconnect electrode wire.
4. Remove screw and nut from electrode bracket.
Fig. 13.
5. Pull electrode assembly from burner and
separate bracket from electrode.
6. Reverse steps to reinstall electrode.
ROTARY IGNITER REPLACEMENT
1. Turn the main gas shut-off valve and the
individual burner control knobs to the OFF
position.
2. Remove shelf and igniter knob.
3. Disconnect electrode wires and grounding wire.
4. Remove screws and nuts securing igniter to
front panel. Fig. 14
5. Reverse steps to reinstall igniter. It is important
to note that any igniter terminal not connected to
an electrode wire, should be connected to a
grounding wire.
Remove screw
Fig. 13
Remove screws and nuts
Fig. 14
Remove nuts
Fig. 12