Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
6
Cart Assembly
CART ASSEMBLY
1. Install the wheel assemblies (A, Figure 8) to the
frame (B). Place the head of the swivel wheel on the
end of the frame. Align the holes and place four 3/8-
16 x 1 hex bolts up through the frame and head of
the swivel. Secure with four flat washers (13/32 I.D.,
7/8 O.D.) and 3/8-16 locknuts.
2. Install the U-bracket (A, Figure 9) to the bottom of the
box (B). Place the three 5/16-20 x 3/4 slotted truss
head bolts and three flat washers (11/32 I.D., 3/4
O.D.) through the inside of the box and the U-brack-
et. Secure with three 5/16 lockwashers and nuts.
3. Turn box upside down and install the frame to the U
bracket (Figure 10). Align the two prong end (A) in
the frame with the ends of the U-bracket and secure
with two 1/2-13 x 1-1/4 hex bolts and locknuts. DO
NOT over-tighten the locknuts, since the box pivots at
this point for dumping.
Note: The latch handle (A, Figure 11) is located on the
right hand side on cart, Mfg. No. 1691526 and on the left
hand side on cart, Mfg. No. 1692526.
4. Turn box with frame upright and install the latch han-
dle (A, Figure 11) and two lift handles (B) as follows:
a. Latch Handle: Place one 5/16-18 x 1 hex bolt with
5/16 spring washer through the inside of the box.
Next place a 5/16 flat washer over the bolt on the out-
side of the box, the latch handle, a 5/16 flat washer, a
5/16 spring washer and a 5/16 nut and jam nut.
Tighten the nuts so that when the latch handle turns
the bolt and nut will not turn. (Be sure the cups of the
spring washers are facing toward the box surface on
both sides.)
b. Lift Handles: Install the two lift handles on the out-
side of the box. Place two 1/4-20 x 1/2 slotted truss
head bolts through the inside of the box and the lift
handle. Secure with two 1/4 lockwashers and nuts.
Figure 9. Install U-Bracket
A. U-Bracket B. Box
Figure 10. Install Frame
A. Prong End
Figure 11. Install Latch Handle
A. Latch Handle B. Lift Handle
Figure 8. Wheel Assembly
A. Wheel Assembly B. Frame