Simplicity Turbo Wide Body Cart & Hitch Outdoor Cart User Manual


 
12
Connecting Cart / Maintenance
Figure 28. Connecting Cart To Tractor
A. Cart Frame C. Spring Clip
B. Clevis Pin
CONNECTING CART TO TRACTOR
Place the cart frame (A, Figure 28) onto tractor brackets
and install the clevis pins (B) and springs clips (C).
MAINTENANCE
Cleaning Clear Tube
To clean the clear mid-tube on the SunStar and
Sovereign series collection systems, wash with warm
water and mild soap or detergent. Use a soft, clean
sponge or cloth. DO NOT use abrasive, alkaline, or
petroleum based cleaners.
Cover
The cover can be rinsed with a hose when dirty. A dirty
cover will inhibit the fast flow of grass clippings into the
cover. Do not leave grass or leaves in the cart for a long
period of time.
Wheels
Lubricate the wheel assembly before using the cart and
as necessary thereafter. A grease fitting is located at
swivel base. Use SAE multi-purpose type grease.
Tires
The tire pressure should be 30 psi.
WARNING
Before opening the cover for any reason, engage
the parking brake, shut off the engine, remove
the key, and wait for all moving parts to stop.
WARNING
The cover is subject to wear and deterioration.
Check the cover frequently. Use an approved
replacement cover.