Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
17
Instructions For Cleaning (Cont.)
3. Carefully pull back on the Burner Assembly, disengaging the venturi from
the Regulator Assembly. Please see Figure 12. Since the Ignitor is still
attached to the Burner Assembly, use care to avoid stressing the cable.
There is enough slack available to allow you to look into the end of the
venturi and clean with a pipe cleaner if needed.
4. When clean, carefully reassemble the Burner Assembly, making sure the
mounting screws are tight and the venturi tube and clip are properly con-
nected to the Regulator Assembly.
5. Clean the outside of the Burner Assembly with a paper towel or damp
sponge. Open any clogged holes with a thin wire.
Storing Your Propane Grill
1. Clean the Grill as instructed above.
2. Store the propane cylinder outdoors in a well-ventilated space and out of
reach of children.
3. Cover Grill when stored outdoors.
4. Store Grill indoors only if the propane cylinder is turned off and discon-
nected, removed from Grill and stored outdoors.
5. When removing Grill from storage, follow the "Cleaning the Burner
Assembly" instructions before starting the Grill.
Any servicing requiring disassembly other than the above cleaning must be
performed by an authorized appliance repair technician.
Do NOT ship gas cylinder if product needs service or repair.
GP200RED IB_13-4-02 13/4/02 14:12 Page 16