Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Rear Burner Conversion
Tools required:
Phillips Head Screwdriver (+)
Monkey Wrench
6mm Nut Driver
6mm Wrench
1.Remove the cover of the rear burner by removing the screws in the firebox. Use another hand to
hold the orifice cover to ensure it doesn't fall.
Install burner orifice
2. Use monkey wrench to loosen the orifice nut and take out the orifice holder. Use a 6mm nut driver or
Allen key to unscrew and remove the orifice.
3. Replace the orifice for LP gas with the orifice for NG. After the orifice is
replaced, put the cover of the rear burner back to its original location.
18