Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Main Burner Conversion
Phillips Head Screwdriver (+)
6mm Nut Driver
1.Remove the rotisserie kit, warming rack, cooking grids, and flame tamers from the firebox.
Remove the main tube burners by removing the screw securing the burners near the back wall
of the firebox and the screws near the front of the firebox that secure the igniter brackets to the
burners. Gently lift the tube burners up and out
2. Locate and remove the LP orifice at the end of each valve with a 6mm nut driver. The main burner NG
orifices are located behind the LP orifices, so no additional orifices need to be installed.
Z_CAUTION: The NG orifice is easily loosened or even removed together with the LP orifice when the LP
orifice is being unscrewed. Make sure the NG orifices are securely installed on the main burner valves
after the LP orifices are removed
z_CAUTION
When converting the grill, screw the orifice in and out of the stem gently.
3. Reinsert tube burners.
Z_CAUTION: Make sure the valve with orifice is inserted into the burner venturi. Restore the igniter
brackets; adjust the distance between the burner and the corresponding igniter for proper ignition.
16