Nexgrill Gas Grill Gas Grill User Manual


  Open as PDF
of 8
 
Searing Side Burner Conversion
Tools required:
Phillips Head Screwdriver (+)
6mm Nut Driver
Allen Key
6mm Wrench
1.Loosen the igniter wire screws, searing main burner brace screws, and back two
screws securing searing side burners.
2. Take out the searing side burner from the firebox. Locate orifice on end of valve and remove by turning
counterclockwise with an 6mm nut driver.
3.Insert NG orifice with a 6mm nut driver and secure tightly by turning clockwise.
Reinsert the searing side burner, tighten all loose screws.
17
 previous next