Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Insert the tubular collar into the left leg PTO
TM
(Propane Take-Off
TM
) opening of the grill until the
Side Table rests snugly against the grill body.
(FIG. 4A & 4B) Rotate the Side Table back and
forth slightly to make sure it is resting solidly. Do
not apply excessive force.
FIG. 4A
Insert Collar into PTO
TM
STEP 1) Turn Side Burner Table upside down.
(FIG. 5A) Pull the hose away from the side burner
table flange. Pull threaded coupling end out of
collar while feeding the hose through hole in the
side of the collar. Pull the hose until the loop is
taken out and hose is extended out of the collar.
(FIG. 5B)
FIG. 4B
FIG. 5B
FIG. 5C
FIG. 5D
STEP 2) Turn the Side Burner Table right side up
and insert the hose end through the left leg PTO
TM
opening of the grill. (FIG. 5C) Push the Side Burner
Table down until the collar rests on the internal
stop. (FIG. 5D) Rotate the Side Burner Table back
and forth slightly to make sure it is resting solidly.
Do not apply excessive force.
Insert Hose
into PTO
TM
SIDE TABLE ASSEMBLY
To reduce the risk of serious bodily injury or death:
· Do not load plastic side table or side burner with more
than 10 lb./4.5kg (one gallon liquid/3.8L). Excess weight
could tip grill over causing a fire or explosion and
damage side table or side burner.
· Do not place hot utensils or cookware on plastic side
table or side burner cover that can cause them to melt.
SIDE BURNER ASSEMBLY
FIG. 5A
Pull hose away
from flange
Stryofoam Pads
Control Knob
Fig. 4B
Lift Bowl Pan and
Burner up and out
7