KitchenAid KFRU271VSS Gas Grill User Manual


  Open as PDF
of 80
 
8
Door Style Tank Tray
1. Open cabinet doors.
2. Press the locking tab on the tank tray and pull out the tray.
3. Place the 20 lb LP gas fuel tank bottom collar into the
mounting hole in the tank tray.
4. Tighten the locking screw against the bottom collar of the
20 lb LP gas fuel tank to secure.
5. Slide the tank tray back into the cabinet and lock into place.
Local LP Gas Supply Conversion
Conversion must be made by a qualified gas technician. The
qualified gas technician shall provide the gas supply to the
selected grill location in accordance with the National Fuel Gas
Code ANSI Z223.1/NFPA 54 - latest edition, and local codes. For
conversion to local LP, the convertible regulator in the conversion
kit supplied with the grill (on some models) must be used. Models
that do not come with the conversion kit require Convertible
Regulator Part Number W10132702. See “Assistance or Service”
section for information on ordering.
IMPORTANT: The gas installation must conform with local
codes, or in the absence of local codes, with the National Fuel
Gas Code, ANSI Z223.1/NFPA 54 - latest edition. The qualified
LP gas technician shall provide the LP gas supply to the selected
grill location in accordance with the National Fuel Gas Code,
ANSI Z223.1/NFPA 54 and local codes.
Follow instructions for converting to local LP gas in the “Gas
Conversions” section.
The gas supply line shall be equipped with an approved shutoff
valve. This valve should be located in the same area as the grill
and should be in a location that allows ease of opening and
closing. Do not block access to the shutoff valve. The valve is for
turning on or shutting off gas to the grill.
A. 20 lb LP gas fuel tank tray locking tab
A. Locking screw
B. Mounting hole
C.Bottom collar
A
A
B C
A. New ANSI Z21.54 certified gray hose
B. Rear of grill
C. To local LP gas supply
A. Gas supply line
B. Shutoff valve “open” position
C. To grill
B
C
A
A
B
C
 previous next