KitchenAid KBZU122TSS Gas Grill User Manual


 
12
Gas Connection Requirements
For Models Equipped for Natural Gas
Natural Gas
Built-in side burner models are equipped for use with Natural
gas. They are design-certified by CSA International for LP
(propane or butane) gases with appropriate conversion.
Built-in models are set for Natural gas use and have a pressure
regulator with ½" female pipe threads.
The supply line shall be equipped with an approved shutoff valve.
This valve should be located in the same area as the side burner
and should be in a location that allows ease of opening and
closing. Do not block access to the shutoff valve. The valve is for
turning on or shutting off gas to the side burner.
LP Gas Conversion Using a Local LP Gas Supply
Conversion must be made by a qualified person. A qualified
Natural gas technician shall provide the LP gas supply to the
selected side burner location in accordance with the National
Fuel Gas Code ANSI Z223.1/NFPA 54 - latest edition, and local
codes.
To convert to LP gas, the LP Gas Conversion Kit Part Number
W10118099 must be used. Follow instructions included with kit.
LP Gas Conversion Using a 20 lb LP Gas Fuel Tank
To convert to LP gas, the LP Gas Conversion Kit Part Number
W10118099 must be used. Follow instructions included with kit.
A 20 lb LP gas fuel tank must be purchased separately.
A.Side burner gas pipe
B.New CSA International approved
“outdoor” flexible gas supply line
C.Rear of side burner
D.To Natural gas supply
A.Gas supply line
B.Shutoff valve “open” position
C.To side burner
A
B
C
D
A
B
C
A.Side burner gas pipe
B.New CSA International approved
“outdoor” flexible gas supply line
C.Rear of side burner
D.To local gas supply
A
B
C
D