Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Question: Can Iconvert my Kenmore gas grill from
one fuel type to another?
Answer: Your Kenmore gasgrill is manufactured to
exact specifications and isapproved bythe Canadian
StandardsAssociation (CSA). Foryearown safety,
conversion kits are notavailable and any attempt to
convert year grittfrom one gastype to another wilt void
your product warranty.
Question: Why doesn't the hose and regulator assem-
bly supplied with my new Kenmore grill fit the older LP
gas tank rye used for years?
Answer: The U.S. Government regulates gas appliances
and LP gastanks. Whenever new regulations are passed
the LP gas tank fittings are altered. If your tank does not
fit the hose and regulator supplied with your newgrilt, the
tank is outdated and must be replaced.
Question: What can cause gdHparts to rust and what
affect does it have on the grill materials.
Answer: Rusting isa natural oxidation process and may
appear on cast-iron and steel parts. Rust will notaffect
the short term performance of your grill or affect the taste
of year leads.
Stainless steel grill parts will not rust. However, weather-
ing and extreme heat can cause stainless steel Lid
surfaces to turn tan color. This isdiscoloration, not rust.
Question: How can I minimize the risk of rust or
stainless steal discoloration?
Answer: To protect against the natural rusting process,
the Burners have a porcelain finish. However, dropping,
scraping or scratching these items will danage the
porcelain finish and allow rusting. We recommend you
"season" these items before and after each use. Consis-
tent seasoning wilt help deter rusting and wilt create an
easy to clean cooking surface.
Weathering and extreme heat can cause exterior
stainless steel surfaces to turn tan in color - which is
not to be confused with rust. Machine oils used in the
manufacturing process of stainless steel can also
cause this tanning color. After removing the protective
PVC film from your Grill Lid use a Stainless Steel
Cleaner to poiish the inside and outside of your grill
Lid. Never use abrasive cleaners or scrubbers. Follow
the easy "Cleaning Exterior Stainless Steel Surfaces"
procedures found in this Owner's Manual.
Question: Sometimes my grill does not light when I
push the Ignition Button. Why?
Answer: Refer to the Lighting Instructions in this
Owner's Manual. Also check these common causes:
• Ignition AA battery may need replacing.
• Ignition wires may be loose. Remove the AA battery,
inspect the Ignitor Junction Box found behind the
Control Panel, and connect any loose wires.
Question: What isthe best way to protect my new
Kenmora gas grill from the weather?
Answer: A good quality grill cover should be used to
protect your grill when not in use. Sears offers a cover
that is made to fit this particular grill model. Also, follow
the cleaning and maintenance instructions in this
Owner's Manual on a timely basis, and your new grill will
give you years of enjoyment.
Question: Where can I buy replacement parts?
Answer: For the repair or replacement parts you need
call 6 a"n - 11 pm CST, 7 days a week 1-800-366-PART
(1-800-366-7278). Use only Sears authorized parts.
The use of any part that is not Sears authorized can be
dangerous and will also void your product warranty. You
wilt need your model number and serial number to
order parts.
Question: Are the serial and model numbers of my grill
listed somewhere for future reference?
Answer: This information is listed on a silver labe!found
on the right side of year Grill Head under the Side Shelf.
Question: Sometimes I heara humming sound
coming from my regulator. What causes this?
Answer: The humming noise is actually the gas
flowing through the regulator. A tow volume of noise is
perfectly normal and wilt not interfere with the opera-
tions of the grill. If humming noise is loud and exces-
sive you may need to purge air from the gas line or
reset the regulator excess gas flow device. Note: This
purging procedure should be done every time a new LP
gas tank is connected to your grill. For help with this
procedure refer to page 17, step 4, or call the
Grill Information Center at the number shown below.
Question: Why doesn't the Fuel Gauge Display show
the tank level after"CHECK" bu_on pressing?
Answer: Make sure the Wire Plug "A" from Fuel Gauge
Display is connected with the Wire Plug "B" from rear of
Tank Pull-Out Tray. O_ it might be that 20 seconds have
not elapsed from the first time that you pressed "Check"
and therefore your second pressing of "Check" hasmanu-
ally turned the fuel gauge to "off". Simply repress"Check"
to manually turn the fuel gauge to "on".
2O