Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Assembling 1"he Cabinet Doors
1. Install Door Stops to Bottom Shelf and Top
Panel of Cabinet. See Fig. 4. Secure firmly
using 4 of the 1/4"xl/2" Phillips head screws
and nuts.
2. if you haven't already done so, remove the
white protective film from the stainless steel
Doors. Attach a Door Handle to each Front
Door using 2 of the M4x6mm Phillips head
screws provided. See Fig. 8. Be careful not to
scratch the door surfaces.
3. When installing the Front Doors, make sure
the door bolt holes are located on the hinge
sides of the Cart Legs.
4. Install either Front Door by inserting 1/4"x5/8"
part4hreaded bolt through the lower door bolt
hole of the Front Door and into the tapped
hole of the Bottom Shelf. Tighten securely.
Next, align the upper door bolt hole of Front
Door with the tapped hole in the Top Panel
of Cabinet. Insert 1/4"x5/8" part4hreaded bolt
provided and tighten securely.
5. Repeat these steps to install the other Front Door.
How To Level The Gritl Cart So The Doors Line-Up
When the top edge of the cabinet doors do not line-up
your grill cart needs to be leveled. This step is often
required after initial assembly and when your grill has
been moved to a new location. To level your grill cart,
use an 11/16" open-end wrench to unscrew either front
or rear Castor counterclockwise from its Castor Seat
(see bottom of the Cart Leg) until the cabinet doors are
aligned. See Fig. 5.
Figure 4
TOP PANEL
OF CABINET
HINGE SIDE
OF CART LEGS
DOORSTOPS
Found in
Hardware Pack
BOTTOM
SHELF
Figure 5
UPPER DOOR
BOLT HOLE_
DOOR HANDLE
'\
\
\
TAPPED HOLE
LOWER DOOR
BOLT HOLE
FRONT DOOR
10