Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
23
MANUALLY LIGHTING THE MAIN BURNERS
WITH THE MATCH HOLDER
1. Open the lid.
2. Ensure all burners are in the “OFF” position.
3. Slowly turn on the gas at the LP cylinder valve
if it is not already on.
4. Place a match in the match light stick. This is
located inside the left cabinet door.
5. Use the stick to slide the lit match through the
cooking grates and the front of the heat
diffuser to the burner you wish to light.
6. Press and turn the burner control knob to “Hi”.
Continue to push in and hold up to 5 seconds or
until the burner lights.
7. If the burner does not light within 5 seconds,
turn the knob to the “OFF” position, wait 5
minutes for the gas to clear and try again.
8. When lit, turn the control knob to the desired
heat setting.
9. Light an adjacent burner with a lit burner by
turning its control knob to “Hi”.
1. Do not use charcoal briquettes, lava rock,
or any type of ceramic product in this grill.
2. Do not put a barbecue cover or other
flammable material in the storage area of
this grill.
MANUALLY LIGHTING THE SIDE BURNER
OR THE INFRARED SEARING BURNER
1. Open the grill lid or side burner cover.
2. Ensure the control knob is in the “OFF”
position as well as any main burner not in
use.
3. Slowly turn on the gas if it is not already on.
4. Strike the match, and place near the top of
the burner.
5. Push in the burner control knob and turn
left to “Hi”.
6. If ignition does NOT occur in 5 seconds, turn
burner control knob to “OFF”, wait 5
minutes for the gas to clear and try again.
7. When lit, turn the control knob to the
desired heat setting.
Never lean over the grill cooking area while
lighting your gas grill. Keep your face and body
a safe distance (at least 18 inches) from the
lighting hole and burners when lighting your
grill with a match.
USE AND CARE INSTRUCTIONS
Side Burner
Infrared Searing Burner
Manual igniter stick