Fisher & Paykel CAD-48 Outdoor Cart User Manual


 
17
13. Attach the sink drain hose to the bottom of the sink (use one tailpiece
washer) (Fig. 54 and 55).
14. Push the sink drain hose up and over the edge of the side panel (Fig. 56).
This will prevent the interference between this hose and the top rack. It
also creates proper drainage from the sink to the water tank. And/or use
the cable tie provided to hold the hose up (Fig. 57).
15. Slide drip tray/pan back into place and reinstall parts removed in #9A.
16. Attach cold water hose (not supplied) to the unit and test
the system for leaks.
A. Close the ball valve behind the cart
B. Turn on the faucet
C. Check all connections inside and outside the cart.
D. If you notice any leaks, turn the water supply off.
Tighten connections that are leaking and retest.
Fig. 55
Fig. 56
Fig. 54
INSTALLATION
SINK DRAIN ASSEMBLY INSTRUCTIONS (OPTIONAL)
Fig. 57
Cable tie